落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压值小功率测试报告仪(耐电孤测试报告仪)-(算起机把控好)

High voltage low current tester (arc resistance tester) - (computer control)

厂商品编码称:耐电弧试验机

Product name: electric arc resistance tester

物料参数:NDH-A

Product model: NDH - A

实现细则:GB/T 1411-2002《液体绝缘层用料耐高压得很低电流值脉冲电流的检验》(就是指IEC  61621-1997)及ASTM D495等准则的要开发制造技术的,并符合要求IEC 149、UL 746A等测试策略

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要的常用条件及功用:

本耐压机是明确软件于电动机、电器落球回弹试验仪,介电击穿强度测定仪开关和小型电器落球回弹试验仪,介电击穿强度测定仪开关等相关行业的高压电工用pp朔料、不饱和不饱和树脂胶和耐压带漆等耐压带建筑的材料的耐电弧放电焊接能评选,主用在粉状耐压带建筑的材料如:pp朔料、塑料薄膜、不饱和不饱和树脂、白云母、工业陶瓷、玻璃钢、耐压带油、耐压带漆、瓦楞纸板等物料的耐电弧放电焊接能測試;

本校正机由计算出来机把控好工作,不错提示 某些實驗报告感觉及實驗报告日期,實驗报告开始和结束后并手机截图某些實驗报告信息,并可直接打印.条件试验数据。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为两排三合一组成部分,中下部为操作方法平台,顶部为现场实验箱。

2 本食品使用*新智力操控技术设备,凭借选编译程序(IEC或ASTM)可电脑自动确定现场实验,并在pc上表示可靠性试验时和结论。

3 **功效不错,抗干拢实力强,各种测试导致精较高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断日期确定误差:小于等于 ±10ms

2 调压器发热量:2kVA

3 稳定检验额定电压:12.5kV

4 现场实验相电压精确度:±3%

5 瞬时电流把控好精确度:±10%  直流电压检测要求:1.5%

6 电级对样品压:(0.5±0.05)N

7 电级资料:钨棒

8 电极片多远:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 实用生态气温:(23±2)℃

10 选用条件对室内温度的:(50±5)%

11 开关电源:220V±5%  50Hz  10A

12 实验    的办法:   新国标/美标/10 mA 累计/20 mA 间断性/30 mA间断/40 mA间断性

13 实验室检测方式方式:

环节段

电弧焊接工作电流

mA

脉冲通断时期s

各程序流程图段持续性周期s

经过多次实验发现总时刻s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

间断通

60

240

5

20

不间断通

60

300

6

30

连着通

60

360

7

40

反复通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

顺序号

分类

數量

提示

01

耐电弧放电检验仪

一架

 

02

探针体统

一整套

 

03

探针支承

五套

 

04

供电电线

一项

 

05

等电位连接放**

1支

 

06

电流值毫安表

一种

 

07

新电脑测控手机app

这套

 

08

试板架

一批

 

09

探针差距规范块

2块

 

10

斜度标准化块

2块

 

11

卫浴陶瓷片

2片

 

12

喷墨复印机

1台

项目

13

估算机

1台

知名品牌

14

操作原因分析书

1份

 

15

合格达标证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 软件型号查询:

NDH-A    耐弧光检测仪-微机操作

NDH-B    耐电孤耐压试验仪-触碰屏把握

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪